Audio Setup Screen - Panasonic AG-HPX500 Service Manual

AUDIO SETUP screen

Item
Selects the function of the F. AUDIO LEVEL control of CH1 input.
●FRONT: The F. AUDIO LEVEL control controls FRONT1 input.
●REAR: The F. AUDIO LEVEL control controls REAR1 input.
FRONT VR CH1
●ALL: The F. AUDIO LEVEL control controls both FRONT1 and REAR1 inputs.
●OFF: The F. AUDIO LEVEL control does not control the input signal.
This control is disabled when the AUDIO SELECT CH1 switch is set to AUTO.
Selects the function of the F. AUDIO LEVEL control of CH2 input.
●FRONT: The F. AUDIO LEVEL control controls FRONT2 input.
●REAR: The F. AUDIO LEVEL control controls REAR2 input.
FRONT VR CH2
●ALL: The F. AUDIO LEVEL control controls both FRONT2 and REAR2 inputs.
●OFF: The F. AUDIO LEVEL control does not control the input signal.
This control is disabled when the AUDIO SELECT CH2 switch is set to AUTO.
Turns on and off the CH1 microphone lowcut filter.
MIC LOWCUT CH1
●ON, OFF
Turns on and off the CH2 microphone lowcut filter.
MIC LOWCUT CH2
●ON, OFF
Turns on and off the CH3 microphone lowcut filter.
MIC LOWCUT CH3
●ON, OFF
Turns on and off the CH4 microphone lowcut filter.
MIC LOWCUT CH4
●ON, OFF
Turns on and off the CH1 limiter.
LIMITER CH1
●ON, OFF
Turns on and off the CH2 limiter.
LIMITER CH2
●ON, OFF
Turns on and off the CH3 limiter.
LIMITER CH3
●ON, OFF
Turns on and off the CH4 limiter.
LIMITER CH4
●ON, OFF
Selects the method for selecting CH3 level.
AUTO LEVEL CH3 ●ON: Automatically controls CH3 level.
●OFF: Enables dial control of CH3 level via dial.
Selects the method for selecting CH4 level.
AUTO LEVEL CH4
●ON: Automatically controls CH4 level.
●OFF: Enables dial control of CH4 level via dial.
Selects the audio channels to be recorded in the DVCPRO and DV formats.
25M REC CH SEL ●2CH: Only recorded on CH1 and CH2.
●4CH: Recorded on channels 1 to 4.
Selects the test signal.
●OFF: Disables test tone output.
●NORMAL: Outputs test tones to channels 1, 2, 3 and 4 when the OUTPUT/AUTO KNEE selector
TEST TONE
●ALWAYS: Outputs test tones to channels 1, 2, 3 and 4 when the OUTPUT/AUTO KNEE selector
●CHSEL: Outputs test tones to channels where the AUDIO IN switch CH1 or CH2 is set to FRONT with
Turns on and off the phantom power supply for the front microphone connected to CH1.
F.MIC POWER1
●ON, OFF
Turns on and off the phantom power supply for the front microphone connected to CH2.
F.MIC POWER2
●ON, OFF
Turns on and off the phantom power supply for the rear microphone.
R.MIC POWER
●ON, OFF
Selects the input level for the front microphone connected to CH1.
F.MIC CH1 LEVEL
●–40 dB, –50 dB, –60 dB
Selects the input level for the front microphone connected to CH2.
F.MIC CH2 LEVEL
●–40 dB, –50 dB, –60 dB
Selects the input level for the rear microphone connected to CH1.
R.MIC CH1 LEVEL
●–50 dB, –60 dB
Selects the input level for the rear microphone connected to CH2.
R.MIC CH2 LEVEL
●–50 dB, –60 dB
Sets the headroom (standard level).
HEADROOM ●59.94Hz System: 18 dB, 20 dB
●50 Hz System: 18 dB, 20 dB
Switches speaker and headphone audio delay.
MONITOR MODE ●LIVE: No audio delay
●RECORDING: Recorded (delayed) audio
Description of settings (Items in bold are factory settings.)
switch is set to BARS and the AUDIO IN switch CH1 is set to FRONT.
switch is set to BARS.
the OUTPUT/AUTO KNEE selector switch set to BARS.
115
Setup menu list