Table of Contents
Advertisement
2
Using the Oscilloscope
• To turn on Marker B, push the Position knob until the marker you want
• To move a marker, turn the Position knob.
Moving markers using the graphical interface
1
2
50
to move appears in the pop- up dialog box.
Marker B has a dashed line pattern on the waveform display. It is
associated with the first available source on the display.
In Measurement Marker mode, the marker position cannot be changed.
Turn on the markers either by pressing the [Markers] key on the front
panel or by choosing Measure > Markers.
Click and drag one of the markers to the position you want on the
waveform, then release.
Clicking and dragging a marker makes it easy to quickly move the
marker to the desired waveform event. You can use the front- panel
Position knob for fine adjustment, or choose the Markers command
from the Measure menu and set the marker position precisely.
Agilent Infiniium 90000 X-Series Oscilloscopes User's Guide
Advertisement
Table of Contents
