Turning digital channels on or off
• To turn the digital channels on, click the check box next to the
Controlling digital channels
• If your oscilloscope is an MSO model, press the
Agilent Infiniium 90000 X-Series Oscilloscopes User's Guide
For Agilent Technologies probes that are compatible with AutoProbe II
interfaces, the oscilloscope will automatically set these characteristics
(except for skew) after identifying the probe when it is connected to the
channel input.
the right end of the toolbar.
Digital Setup dialog box so you can control the digital thresholds and
four digital buses, enable active channels, turn on signal names, and
change the vertical height of digital channels.
Using the Oscilloscope
at
button to open the
43
2