To Move The Markers Using The Graphical Interface - Agilent Technologies Infiniium 9000 Series User Manual

To move the markers using the graphical interface

1 Turn on the markers.
You can use the [Markers] key on the front panel, or select Markers from the
Measure menu.
2 Click and hold the left mouse button or touch screen stylus while the
mouse pointer is on one of the markers, then drag the marker to the
position you want on the waveform, then release.
Clicking and dragging a marker makes it easy to quickly move the marker to
the desired waveform event. You can use the front-panel Measure Position
knob for fine adjustment, or select the Markers command from the Measure
menu and set the marker position precisely. See the online help for details.
Figure 3-24
Moving the Markers
Using the Oscilloscope
To move a
marker,
click the left
mouse
button or
touch
screen
stylus with
the pointer
on the
marker,
drag the
marker to
the new
position,
then release
81