Agilent Technologies 90000 X Series User Manual page 47

2
Using the Oscilloscope
horizontal reference point. When you make the measurement using
drag- and- drop, the measurement uses the waveform feature closest to
the point where you drop the icon.
The most commonly used measurements are available on the toolbar.
Others are available by selecting them from the Measure menu.
When you drag and drop a measurement icon on a waveform, the icon
outline changes color to match the color of each waveform it touches so
you can easily see which waveform will be measured when you release.
The measurement results are also displayed in color so you can easily
see which waveform source is being measured.
For edge- sensitive measurements, when you drop the measurement icon
on a waveform, a geometric icon appears in the waveform marker color.
This icon shows exactly where the measurement is being made. The
icon is also displayed next to the measurement results readout to
associate the readout with the waveform and feature being measured.
This feature helps you distinguish measurement results from each other
when you make multiple measurements on the same waveform, but at
different waveform features. For example, a series of rise time
measurements on several different edges of the same waveform all have
unique geometric icons to show each measurement's location. See
Figure 25.
Agilent Infiniium 90000 X-Series Oscilloscopes User's Guide 47