Table of Contents
Advertisement
Using the Oscilloscope
To move the markers using the graphical interface
To move the markers using the graphical interface
1 Turn on the markers.
You can use the Marker A and Marker B keys on the front panel, or select
Markers from the Measure menu.
2 Click and hold the left mouse button or touch screen stylus while the
mouse pointer is on one of the markers, then drag the marker to the
position you want on the waveform then release.
Clicking and dragging a marker makes it easy to quickly move the marker to the
desired waveform event. You can use the front-panel arrow keys for fine
adjustment. Or, you can select the Markers command from the Measure menu
and set the marker position precisely. See the built-in information system for
details.
3-52
Advertisement
Table of Contents
