Table of Contents
Advertisement
9. Repeat steps 7 and 8 above to complete the message (up to
16 characters). If you make a mistake, press the B key
to move back to the incorrect character, and then enter the
correct character.
10. Press and hold in the h key for one second to delete all data after the cursor that
may have been previously stored.
11. When the Message entry is complete, press the m key
briefly to save the new setting.
12. If you wish to store another message, repeat steps 3 through
11 above.
13. Press the PTT switch to exit to normal operation.
(Requires all members to enter the same member list (includes own ID) into the same
member box in the same order.)
It is possible to register a maximum of 20 persons, in order to identify the sender. When
you receive a message transfer, you will know who sent the message by the ID in the
register. In addition, your ID can be sent to the other members when you transmit any
messages to them.
If all the members share the register information (ID), the message sender ID will be
shown on the display when receiving the message.
Even if no IDs are registered, the message function can still work. However, in this case,
"MESSAGE1" though "MESSAGE20" will be displayed when receiving a message.
We recommend that you use your call sign for the member list.
1. Press and hold the m key for one second to enter the Set Mode.
2. Rotate the DIAL knob to select Set Mode Item 52: MES-
SAGE LIST.
3. Press the m key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the desired member box (1
~ 20) into which you wish to store a member ID. The LCD
will display the previously stored personal ID.
5. Press the M key briefly to enable programming of the
personal ID.
6. Press and hold in the h key for two seconds to clear the
previously stored personal ID, if desired.
7. Rotate the DIAL knob or press the keyboard to set the first
VX-8GR/GE O
PERATING
P
ROGRAMMING A
P
ROGRAMMING A
M
ANUAL
M
ESSAGE
M
ESSAGE
M
L
EMBER
IST
F
EATURE
91
Advertisement
Table of Contents
