Table of Contents
Advertisement
S
M
ET
ODE
S
M
I
75: SCAN LAMP
ET
ODE
TEM
Function: Enables/Disables the Scan Lamp (while scanner is paused).
Available Values: ON / OFF
Default: ON
S
M
I
76: SCAN RE-START
ET
ODE
TEM
Function: Selects the Scan Re-start Delay time.
Available Values: 0.1sec ~ 0.9sec (0.1sec/step) or 1.0sec ~ 10.0sec (0.5sec/step)
Default: 2.0sec
S
M
I
77: SCAN RESUME
ET
ODE
TEM
Function: Selects the Scan Resume mode.
Available Values: 2.0sec ~ 10.0sec (0.5sec/step) /BUSY / HOLD
Default: 5.0sec
2.0sec - 10.0sec: The scanner will halt on a signal it encounters, and will hold there for
the selected resume time. If you do not take action to disable the scanner
within that time period, the scanner will resume even if the station is still
active.
BUSY:
The scanner will halt on a signal it encounters. When the signal drops,
the scanner will resume. The Scan resume time (default 2 seconds) is
controlled by Set Mode Item 76: SCAN RE-START.
HOLD:
The scanner will halt on a signal it encounters. It will not restart auto-
matically; you must manually re-initiate scanning if you wish to resume.
S
M
I
78: SENSOR DISPLAY
ET
ODE
TEM
Function: Selects the sensor information when the transceiver is operating in the "Mono"
band mode with large characters.
Available Values: DC / TEMP/ OFF
Default: DC
DC:
Indicates the battery voltage and battery type.
TEMP: Indicates the current temperature inside the transceiver's case.
OFF:
Disables the sensor information (Indicates the "Current Time" only).
S
M
I
79: SENSOR INFO
ET
ODE
TEM
Function: Indicates the information of the internal sensors.
S
M
I
80: SET MODE CSR
ET
ODE
TEM
Function: Selects the Set Mode Cursor.
Available Values: nine patterns (
Default:
142
S
M
S
ET
ODE
ELECTION
/
/
D
ETAILS
/
/
/
/
VX-8GR/GE O
/
/
)
M
PERATING
ANUAL
Advertisement
Table of Contents
