Yaesu VX-8GR/GE Operating Manual page 73

13. Rotate the DIAL knob to select the desired one of the three
preset icons. To choose another icon, press the B key,
then rotate the DIAL knob to select the desired symbol after
having selected the preset icon. When you have completed
selecting the icon, press the B key again. You may
choose 1 of 46 different symbols.
14. Press the m key briefly to save the new setting.
15. Rotate the DIAL knob to select Set Mode Item 25: POSI-
TION COMMENT.
16. Press the m key briefly to enable adjustment of this Set
Mode Item.
17. Rotate the DIAL knob to select the desired comment.
18. Press the m key briefly to save the new setting.
19. Rotate the DIAL knob to select Set Mode Item 23: MY
POSITION.
20. Press the m key briefly to enable adjustment of this Set
Mode Item.
21. If you enter your position (Longitude/Latitude) manually
without using the built-in GPS receiver, perform the fol-
lowing procedures. Otherwise, select "GPS" by rotating the
DIAL knob and advance to step 22.
SSID
Non
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
-13
-14
-15
VX-8GR/GE O
PERATING
P
REPARATIONS
SSID L
Home Station, Home Station IGate
Digipeater
Digipeater
Digipeater
HF to VHF Gateway
IGate (not Home Station)
Operation via Satellite
Hand-held Transceiver, such as VX-8GR
Maritime Mobile
Mobile Transceiver, such as FTM-350R
Operation via Internet
APRS touch-tone User (and the Occasional Balloons)
Portable Units, such as Laptops, Camp Sites etc.
Not Used
Trackers
HF Operation
M
ANUAL
APRS
IST
D
ETAILS
® O
PERATION
71