Yaesu VX-8GR/GE Operating Manual page 128

S M
ET ODE
S M I
ET ODE TEM
1: ANTENNA ATT Enables/Disables the receiver Front-end Attenuator.
2: APO Setting of the Automatic Power-Off time.
3: ARTS BEEP Select the Beep option during ARTS operation.
4: ARTS INTERVAL Select the Polling Interval during ARTS operation.
5: BANK LINK Enables/Disables the Memory Bank Link Scan.
6: BANK NAME Stores Alpha-Numeric "Tag" for the Memory Bank.
7: BCLO Enables/disables the Busy Channel Lock-Out feature.
8: BEEP EDGE Enables/disables the Band-edge beeper while selecting the frequency by the DIAL knob.
9: BEEP LEVEL Adjust the Beep volume level.
10: BEEP MELODY Create the Beep Melody for Bell ringer function.
11: BEEP SELECT Enables/Disables the keypad beeper.
12: BELL RINGER Selects the number of Bell ringer repetitions.
13: BELL SELECT Enables/Disables the Bell ringer function and its sound selection.
14: BUSY LED Enables/Disables the BUSY LED while the squelch is open.
15: CLOCK SHIFT Shifting of CPU clock frequency.
16: CW ID Program and activate the CW Identifier (used during ARTS operation).
17: CW LEARNING Enables/Disables the CW Learning feature.
18: CW PITCH Select the CW tone pitch for the CW Learning, CW Training, and CW Identifier functions.
19: CW TRAINING Enables/Disables the CW Training feature.
20: DC VOLTAGE Indicates the DC Supply Voltage.
21: DCS CODE Setting of the DCS code.
22: DCS INVERSION Enables/Disables the "Inverted" DCS tone.
23: DTMF DELAY Selects the DTMF Autodialer Delay Time.
24: DTMF MANUAL/AUTO Enables/Disables the DTMF Autodial feature.
25: DTMF SELECT Programming of the DTMF Autodialer.
26: DTMF SPEED Selects the DTMF Autodialer Sending Speed.
27: EAI Enables/Disables the Emergency Automatic ID (EAI) feature.
28: EAI TIME Sets the transmitting time of the Emergency Automatic ID (EAI) feature.
29: EMERGENCY SELECT Select the alarms utilized when the Emergency function is engaged.
30: EXTENDED MENU Enables/Disables the extended Set Mode Menu.
Set the time duration that a secondary function is active when the [ F/W ] key is pressed and
31: FW KEY HOLD TIME
held to enable the secondary functions.
32: HALF DEVIATION Reducing the Deviation level by 50 %.
33: HOME VFO Enables/Disables the function of the VFO DIAL knob, while in the Home Channel mode.
Selects the primary function of the [ H/M ] key (press the [ H/M ] key).
34: HOME/REVERSE
35: INT MANUAL/AUTO Enables/Disables the DTMF Autodialer feature while operating using the Internet Connec-
tion feature (WIRES ).
36: INTERNET Enables/Disables the Internet Connection feature (WIRES ).
37: INTERNET CODE Selects the Access Number (DTMF digit) for the SRG operation of the Internet Connection
feature (WIRES ).
Selects the primary function of the [ INTERNET ] key.
38: INTERNET KEY
39: INTERNET MODE Selects the operating mode of the Internet Connection feature (WIRES ).
40: INTERNET SELECT Programming of the Access Number (DTMF code) for the FRG station of the WIRES (or
non WIRES Internet Link System) access.
41: LAMP Selects the LCD/Keypad Lamp mode.
42: LANGUAGE Selects the language for the Set Mode selections.
43: LCD CONTRAST Setting of the Display contrast level.
44: LCD DIMMER Setting of the Display brightness level.
45: LED LIGHT Illuminates the white LED light continuously (useful as emergency flashlight at night).
46: LOCK Selects the Control Locking lockout combination.
47: MEMORY FAST STEP Selects the channel step for the fast channel selection mode while in the Memory Recall
mode.
48: MEMORY NAME Stores "Alpha-Numeric" tags for the Memory channels.
49: MEMORY PROTECT Enables/Disables the Memory Write Protector.
126
F
UNCTION
VX-8GR/GE O
A V
VAILABLE ALUES
( D
: B
I
EFALT OLD TALIC
ON / OFF
0.5hour - 12.0hour / OFF
IN RANGE / ALWAYS / OFF
15sec / 25sec
--
--
ON / OFF
ON / OFF
LEVEL 1 ~ LEVEL 9 ( LEVEL 5 )
--
KEY & SCAN / KEY / OFF
1Time - 20Times / CONTINUOUS
OFF / BELL /
USER BP1 / USER BP2 / USER BP3
ON / OFF
ON / OFF
--
--
400 - 1000 Hz ( 50 Hz/step ) ( 700 Hz )
--
--
104 standard DCS codes ( DCS 023 )
RX-NORMAL, TX-NORMAL /
RX-INVERT, TX-NORMAL /
RX-BOTH, TX-NORMAL /
RX-NORMAL, TX-INVERT /
RX-INVERT, TX-INVERT /
RX-BOTH, TX-INVERT
50ms / 250ms / 450ms / 750ms / 1000ms
MANUAL / AUTO
--
50ms / 100ms
ON / OFF
INT 1min ~ INT 9min / INT10min / INT15min /
INT20min / INT30min / INT40min / INT50min
( INT 5min )
BEEP / STROBE / BEEP&STROBE /
BEAM / BEEP&BEAM / CW / BEEP&CW /
CW-ID TX
ON / OFF
FW0.3sec / FW0.5sec / FW0.7sec /
FW1.0sec / FW1.5sec
ON / OFF
DISABLE / ENABLE
HOME / REV
MANUAL / AUTO
ON / OFF
DTMF 0 ~ DTMF 1, DTMF A ~ DTMF D,
DTMF , DTMF # ( DTMF 1 )
INTERNET / INTERNET SELECT /
SET MODE
FRG / SRG
--
KEY 2sec - KEY10sec / CONTINUOUS /
OFF ( KEY 5sec )
ENGLISH / JAPANESE
LEVEL 1 ~ LEVEL15 ( LEVEL 7 )
LEVEL 1 ~ LEVEL 4
--
KEY / DIAL / KEY&DIAL / PTT / KEY&PTT /
DIAL&PTT / ALL
10CH / 20CH / 50CH / 100CH
--
ON / OFF
M
PERATING ANUAL
)