Yaesu VX-8GR/GE Operating Manual page 110

S M
ENSOR
7. Press the M key briefly, then rotate the DIAL knob to set
"Timer Signal" On (SIG) or Off (––). In the "SIG" mode, a
double-beep will be emitted from the speaker at the top of
each hour, as long as the transceiver is turned on.
8. Press the M key briefly, press the c key to start the clock from "00" seconds.
9. When you have finished the time setup, press the PTT switch to save the new setting
and return to normal operation.
The VX-8GR/GE has a rechargeable Li-Ion battery cell used just for the
clock. Therefore, the VX-8GR/GE can maintain its clock data for approxi-
mately two months without using the main battery pack or external DC power.
108
ODE
VX-8GR/GE O
PERATING
M
ANUAL