Getting Started; Setting Up - Panasonic KX-TGJ420E Operating Instructions Manual

Setting up

Connections
n Base unit
Connect the AC adaptor to the unit by
pressing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
unit, then to the telephone line jack until
you hear a click.
A DSL/ADSL filter (not supplied) is
required if you have a DSL/ADSL service.
Note:
R Use only the supplied Panasonic AC
adaptor PNLV226E.
R Use only the supplied telephone line cord.
4 5
3
1
2
n Charger
Connect the AC adaptor plug to the unit
until you hear a click.
Connect the AC adaptor to the power
outlet.
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
4
Note:
R Use only the supplied Panasonic AC
adaptor PNLV233E.
Battery installation
R USE ONLY rechargeable Ni-MH batteries
AAA (R03) size (
1
R Do NOT use alkaline/manganese/Ni-Cd
batteries.
R Confirm correct polarities (
R Follow the directions on the display to set
up the unit.
Battery charging
Charge for about 7 hours.
R Confirm "Charging" is displayed (

Getting Started

1 2
).
, ).
1
1 ).
11