FABIA 2000
1.0/37; 1.4/44; 1.4/50 Engine, Mechanical Components
–
Release screws -2-.
–
Unscrew the fixing screws -arrows- from the gearbox
mount.
–
Slightly lower the engine/gearbox unit and pull out
carefully towards the front.
Secure the engine with engine mount -MP 1-180- on the
assembly support -MP 9-101- before performing assem-
bly work.
Note
Grip the engine on the supports of the engine mount -ar-
rows-.
Instead of engine mount -MP 1-180- it is also possible to
use engine mount -MP 1-202-.
Installing the engine
Note
♦
Always replace the seals and gaskets during assem-
bly work.
♦
Always replace self-locking nuts.
♦
Apply hot screw paste -G 052 112 A3- to the pin
screws on the exhaust manifold.
Tightening torques ⇒ 10-1 page 9
♦
Assembly bracket ⇒ 10-1 page 9
♦
Edition 02.02
S00.5305.03.20
1
Removing and Installing Engine
3
10
2
S10-0140
S10-0120
MP 1-180
MP 9-101
S10-0082
10-1
7
page