8 Creation of the PDM Network Structure for the Maintenance Project
8. Add the other field devices as described in steps 6 to 7.
Enter:
–
the PROFIBUS address for the PROFIBUS field device.
–
the IP address for the PROFINET field device.
–
the port on the module for a PROFIBUS DP or PROFINET Station.
–
the channel number for HART field devices.
–
the PA bus address for PA field devices.
Figure 8-18
The existing PROFIBUS DP and PROFIBUS PA addresses can also be checked in
the PDM Lifelist. A requirement for this is that the project was compiled and loaded
into the WinLC RTX Station.
Figure 8-19
PDM Maintenance Station
Entry ID: 109776936,
V1.0,
02/2020
57