7 Preparation of the HART Multiplexer/Wireless HART Gateway
Inserting a HART Multiplexer
5. Right-click the inserted network "Net01" and select "Add I/O System".
6. Enter the address of the Multiplexer in the following "Add I/O System" dialog
window:
Note
The steps 7 to 9 are only necessary if the multiplexer is not yet recognized by the
HART Server. If the multiplexer is recognized, you can continue directly with step
10.
7. Enter the new name.
Figure 7-6
PDM Maintenance Station
Entry ID: 109776936,
V1.0,
02/2020
35