8 Creation of the PDM Network Structure for the Maintenance Project
Figure 8-17
3. Enter the IP address.
4. The PROFIBUS DP network is created automatically.
5. Right-click the created PROFIBUS DP network and select "Insert object..."
from the context menu.
6. Right-click the created network and select "Insert object..." from the context
menu.
7. Click "Assign device type", then select either the device used or the station
used from the menu item "Networks > PROFINET" or "Networks > PROFIBUS
DP".
PDM Maintenance Station
Entry ID: 109776936,
V1.0,
02/2020
56