Siemens SIMATIC PCS 7 Manual page 38

7 Preparation of the HART Multiplexer/Wireless HART Gateway
Inserting a HART device
10. Right-click the network "Net01" and select "Add Instrument".
Figure 7-10
11. Enter the channel to which the HART device is connected.
Figure 7-11
Note The steps 12 and 13 are only necessary if the HART device is not yet
recognized. If the HART device is recognized, you can continue directly with
step 14.
PDM Maintenance Station
Entry ID: 109776936, V1.0, 02/2020
38