Solenoid Installation; Solenoid Removal - Wolf Rangetop Service Manual

Component Removal and Installation
Remove the Wok Spacer Rail (continued)
Remove the Wok Spacer Rail
Lift the wok spacer rail directly upward from the supports in
the burner box.
WOK SPACER RAIL INSTALLATION
Install the Wok Spacer Rail
Set the wok spacer rail onto the supports in the burner box,
positioned so that its screw holes will align with the screw
holes in the wok frame.

SOLENOID REMOVAL

To remove the solenoid, first remove:
Flat wok grate
1
Wok grate
2
3 Wok top plate
4 Wok frame assembly
Remove the Solenoid
1 Disconnect the solenoid wire connectors.
5
2 Use a / " combination wrench to disconnect the solenoid
8
inlet line.
5
3 Use a / " combination wrench to disconnect the solenoid
8
outlet line.
828990 REV. A
Sealed Burner Rangetop with Wok Service Manual
4

SOLENOID INSTALLATION

After installing the solenoid, install:
Install the Solenoid
1
2
3
4
WOK BURNER ASSEMBLY REMOVAL
To remove the wok burner assembly, first remove:
1
2
3
Remove the Wok Burner Assembly
1
6
Remove the solenoid from the unit.
Place the solenoid into the unit.
5
Use a / " combination wrench to connect the solenoid
8
outlet line.
5
Use a / " combination wrench to connect the solenoid inlet
8
line.
Connect the solenoid wire connectors.
Flat wok grate
Wok grate
Wok top plate
Lift the wok burner assembly directly upward from the tray.
service.subzero.com