Burner Assembly Removal - Wolf Rangetop Service Manual

Component Removal and Installation
REMOVE THE ISLAND TRIM (continued)
2 Pull the trim upward to remove it from the unit.
ISLAND TRIM INSTALLATION
Install the Island Trim
1 Slide the island trim down into the openings at the back of
the unit's side panels.
2 Use a Phillips screwdriver to install the screws into the
island trim.

BURNER ASSEMBLY REMOVAL

To remove the burner assembly, first remove:
Burner grate
1
Both burner caps
2
Remove the Burner Assembly
1 Use a T-15 Torx bit to remove the two screws holding the
burner assembly to the orifice holder.
2 Lift the burner assembly from the burner pan.
828990 REV. A
Sealed Burner Rangetop with Wok Service Manual
3
BURNER ASSEMBLY INSTALLATION
Install the Burner Assembly
1
2
3
BURNER PAN REMOVAL
To remove the burner pan, first remove:
1
2
3
Remove the Burner Pan(s)
12
Disconnect the electrode wire from the ignitor.
Ignitor
Electrode Wire
Attach the electrode wire to the ignitor.
Place the burner assembly into the burner pan.
Use a T-15 Torx bit to install the screws holding the burner
assembly to the orifice holder, torqued to 24 in lb.
Burner grate
Both burner caps
Both burner assemblies
Lift the burner pan(s) from the unit.
service.subzero.com
Burner Cap
Burner Assembly