Wolf Rangetop Service Manual page 10

Component Removal and Installation
REMOVE THE BOTTOM PANEL (continued)
3 Remove the wok bottom panel from the unit.
BOTTOM PANEL INSTALLATION
Install the Bottom Panel
1 Place the bottom panel into the unit.
1
2 Use a / " hex bit to install the bottom panel mounting
4
screws.
3 Reposition the wok orifice assembly and elbow for
installation.
WOK ELBOW REMOVAL
To remove the wok elbow, first remove:
1 Flat wok grate
2 Wok grate
Wok top plate
3
Wok frame assembly
4
Wok burner assembly
5
Wok ignitor
6
Wok tray
7
8 Wok mounting bracket
Remove the Wok Elbow
1 Remove the set screw on the side of the wok elbow.
2 Pull the wok elbow forward from the wok orifice holder.
828990 REV. A
Sealed Burner Rangetop with Wok Service Manual
3
WOK ELBOW INSTALLATION
Install the Wok Elbow
1
2
WOK ORIFICE ASSEMBLY REMOVAL
To remove the wok orifice assembly, first remove:
1
2
3
4
5
6
7
8
Remove the Wok Orifice Assembly
1
2
3
10
Remove the wok elbow from the unit.
Insert the wok elbow into the wok orifice holder so that it
faces upward and the elbow's outlet will align with the hole
in the wok tray.
Install and tighten the set screw on the side of the wok
elbow.
Flat wok grate
Wok grate
Wok top plate
Wok frame assembly
Wok burner assembly
Wok ignitor
Wok tray
Wok mounting bracket
Disconnect the gas line to the wok orifice assembly.
Remove the set screw on the side of the wok orifice holder.
Pull the wok orifice assembly away from the wok elbow.
service.subzero.com