Install The Drive (Procedure E) - YASKAWA GA800 Installation Manual

3 Mechanical Installation
• M10 screws: 17.65 N∙m to 22.56 N∙m (156.22 lbf∙in to 199.67 lbf∙in)
• M12 screws: 31.38 N∙m to 39.23 N∙m (277.74 lbf∙in to 347.22 lbf∙in)
A - Enclosure panel
B - Gaskets
■

Install the Drive (Procedure E)

Cut an opening in the enclosure panel before you install the attachment. Refer to
Type 12 Heatsink External Mounting) on page 18
1.
Remove the shipping attachment from the top of the drive.
A - Shipping attachment
2.
Remove the shipping attachment from the bottom of the drive.
A - Shipping attachment
28
Figure 3.24 Install the Drive into the Opening of the Enclosure Panel
for more information.
Figure 3.25 Remove the Shipping Attachment
Figure 3.26 Remove the Shipping Attachment
C - M10 screws or M12 screws
D - M5 screws
Panel Cut-Out Dimensions (IP55/UL
YASKAWA TOEPC71061779D GA800 Drive Installation Manual