Installation - YASKAWA GA800 Installation Manual

Environment
• 10 Hz to 20 Hz: 1 G (9.8 m/s
• 20 Hz to 55 Hz:
Vibration
– 2004 to 2211, 4002 to 4168, T103 to T168: 0.6 G (5.9 m/s
– 2257 to 2415, 4208 to 4720, 5289 to 5472, T208 to T720: 0.2 G (2.0 m/s
Install the drive vertically for sufficient airflow to cool the drive.
Installation Orientation
NOTICE
Do not let unwanted objects, for example metal shavings or wire clippings, fall into the drive during drive
installation. Put a temporary cover over the drive during installation. Remove the temporary cover before start-up. Unwanted objects
inside of the drive can cause damage to the drive.
Note:
Do not put drive peripheral devices, transformers, or other electronics near the drive. Shield the drive from electrical interference if
components must be near the drive. The drive or the devices around the drive may malfunction due to electrical interference.
◆
IP55/UL Type 12 Heatsink External Mounting Drive and Cut-Out Dimensions and

Installation

Model Exterior and Mounting Dimension Diagram
2004 - 2082
4002 - 4060
Exterior and Mounting
Dimension Diagram 1
2110
4075
2138
Exterior and Mounting
4089, 4103
Dimension Diagram 2
T103
2169, 2211
Exterior and Mounting
4140, 4168
Dimension Diagram 3
T140, T168
2257, 2313
Exterior and Mounting
4208 - 4302
Dimension Diagram 4
T208 - T302
2360, 2415
4371, 4414
Exterior and Mounting
Dimension Diagram 5
5289
T371, T414
4477 - 4720
Exterior and Mounting
5382 - 5472
Dimension Diagram 6
T477 - T720
YASKAWA TOEPC71061779D GA800 Drive Installation Manual
Conditions
2 , 32.15 ft/s 2 )
2 , 19.36 ft/s
Panel Cut-Out Dimension Diagram
Panel Cut-Out
12
Dimension Diagram 1
Panel Cut-Out
13
Dimension Diagram 2
Panel Cut-Out
14
Dimension Diagram 3
Panel Cut-Out
15
Dimension Diagram 4
Panel Cut-Out
16
Dimension Diagram 5
Panel Cut-Out
17
Dimension Diagram 6
3 Mechanical Installation
2 )
2 , 6.56 ft/s 2 )
Installation Procedure
Procedure A
18
Procedure B
19
Procedure C
19
20
Procedure D
20
21 Procedure E
24
24
26
27
28
11