Arrow Storage Products Woodlake Owner's Manual & Assembly Instructions page 28

Step 15
S28 ctr
(44)
1
Install 1 ridge cap on the com-
pleted roof section using bolts and
nuts. Fasten the roof panel rib, peak
cap and ridge cap together using
bolts and nuts.
2
Fasten the remaining left and
right roof panels as you unroll the
weather stripping tape, and press it
down, install the second ridge cap
overlapping the rst ridge cap. Align
holes and fasten using bolts and nuts.
Fasten the remaining peak cap in the
same manner.
3
Fasten the lower end of the panels
to the side wall angles using screws
and washers. Use bolts and nuts
through wall angle overlaps at the
bottom of the panel.
Ridge Caps & Panels
(26)
6640
Peak Cap
Parts Needed For
STEP
2
Cut Weather
Stripping and
Fold Under
28
6869 Ridge Cap (2)
6641 Left Roof Panel (1)
6640 Right Roof Panel (1)
STEP
1
Peak Cap
6869
6869
6641
STEP
3