Advertisement
Step 2
S15 ctr
(6)
The main frame pieces reinforce
the walls. These pieces will later be
installed in the center and at the top
edge of the side walls and the rear
wall. Proceed as follows:
1
Overlap the rear wall channel
pieces as shown in the figure and
fasten the two pieces together with
one bolt in the center hole (three
holes will align).
2
Make two side wall channels by
overlapping the side wall channel
pieces as shown. Fasten each set
together with one bolt in the center
hole of each set.
3
Overlap the rear wall angle
pieces as shown in the figure and
fasten them together with one bolt
in the center hole.
4
Make two side wall angles by
overlapping the side wall angle pieces
as shown. Fasten each set together
with one bolt in the center hole.
5
Double check the length of each
and set these pieces aside for later
use.
Parts Needed For
Frame Assemblies
9917
9923
5986
9298
STEP
5
15
5986 Rear Wall Angle (2)
9917 Rear Wall Channel (2)
9923 Side Wall Channel (4)
9298 Side Wall Angle (4)
118 1/8"
Side Wall Channels
111 5/8"
STEP
STEP
2
1
5986
9298
STEP
STEP
4
3
Side Wall Channels
111 5/8" 283,5 cm
Side Wall Angles
111 5/8"
Rear Wall Channel
300,0 cm
9917
283,5 cm
9923
Rear Wall Angle
118 1/8" 300,0 cm
Side Wall Angles
111 5/8"
283,5 cm
Rear Wall Channel
118 1/8" 300,0 cm
Rear Wall Angle
118 1/8" 300,0 cm
283,5 cm
Advertisement
