Advertisement
Quick Links
Owner's Manual & Assembly Instructions
CL01
708430118
Storage Area: 27 Sq. Ft. 167 Cu. Ft.
2,5 m
2
BUILDING DIMENSIONS
*Approx.
Size
6' x 5'
1,8 m x 1,4 m
188,0 cm x 144,8 cm
Model No.
ED65SB
Missing Parts, Questions on Assembly?
Call: 1-800-851-1085 or
assist@arrowsheds.com
Do not return to dealer, they are not
equipped to handle your requests.
4,7 m
3
* Size rounded o to the nearest foot
Exterior Dimensions
Base
(Roof Edge to Roof Edge)
Size
Width
74" x 57"
76 1/4"
193,7 cm
ED65BS
ED65
WR65
WR65EU
Depth
Height
59 1/2"
79 1/8"
151,1 cm
201,0 cm
ED65Z
CAUTION: SOME PARTS HAVE SHARP EDGES. CARE
MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES
TO AVOID A MISHAP. FOR SAFETY SAKE, PLEASE READ
SAFETY INFORMATION PROVIDED IN THIS MANUAL
BEFORE BEGINNING CONSTRUCTION. WEAR GLOVES
WHEN HANDLING METAL PARTS.
Interior Dimensions
(Wall to Wall)
Width
Depth
Height
71 1/4"
54 1/4"
77 7/8"
181,0 cm
137,8 cm
197,8 cm
ED65LG
GD65
B
Door
Opening
Width
Height
32"
69 1/4"
81,3 cm 175,9 cm
Advertisement
Related Manuals for Arrow Storage Products ED65SB
Summary of Contents for Arrow Storage Products ED65SB
- Page 1 Owner's Manual & Assembly Instructions CL01 ED65BS ED65LG Model No. ED65 GD65 ED65Z ED65SB WR65 WR65EU Missing Parts, Questions on Assembly? Call: 1-800-851-1085 or assist@arrowsheds.com Do not return to dealer, they are not equipped to handle your requests. 708430118 CAUTION: SOME PARTS HAVE SHARP EDGES. CARE Storage Area: 27 Sq.
- Page 3 BEFORE YOU BEGIN..Owner's Manual Before beginning construction, check local building codes regarding footings, location and other requirements. Study and understand this owner's manual. Important information and helpful tips will make your construction easier and more enjoyable. Assembly Instructions: Instructions are supplied in this manual and contain all appropriate information for your building model.
-
Page 4: Tools And Materials
PLAN AHEAD..Watch the Weather: Be sure the day you select to install your building is dry and calm. Do not attempt to assemble your building on a windy day. Be careful on wet or muddy ground. Teamwork: Whenever possible, two or more people should work together to assemble your building. - Page 5 SAFETY FIRST..Safety precautions are important to follow throughout the construction of your building. •Care must be taken when handling various •Practice caution with the tools being used in pieces of your building since some contain the assembly of this building. Be familiar with sharp edges.
- Page 6 CARE & MAINTENANCE..Finish: For long lasting nish, periodically clean and wax the exterior surface. Touch-up scratches as soon as you notice them on your unit. Immediately clean the area with a wire brush; wash it and apply touch-up paint per manufacturer's recommendation. Roof: Keep roof clear of leaves and snow with long handled, soft-bristled broom.
- Page 7 ACCESSORIES..FLOOR FRAME KITS ROOF STRENGTHENING (heavy snow load) KITS Extra roof beams and gable braces designed for added protection against heavy snow accumulation. Increases the strength of your roof. BEFORE AFTER ANCHOR KITS Model No. AK4 MODELS FB47410, FB5465, FB106-A Anchor Kit contains heavy-duty steel FB109-A and FB1014-A augers, 60' (18 m) of steel cable and...
-
Page 8: Special Note
ORDERING ACCESSORIES..02/13 We recommend that you purchase accessory items from your local storage building dealer whenever possible; however, because the full line of accessories is not always available from all dealers, Arrow is o ering them to you on a direct basis. There are two ways to order Arrow Storage Building Accessories: Option 1 Option 2... - Page 9 Base The Base For Your Building No matter which of the options below you choose for a base, an ARROW ANCHORING KIT is recommended as an e ective method of properly securing your building after assembly is complete. OPTION 1: Directly on ground (earth) Assemble your building directly on level ground (grass, dirt, rock, sand, etc.).
- Page 10 Anchoring Anchoring Down The Building It is important that the entire oor frame be anchored after the building is erected. Below are recommended ways of anchoring. Anchoring into Wood/Post: Arrow Anchoring Kit: (Model No. AK4 or 60298) Use 1/4" (6 mm) Wood Screws. There are 1/4" (6 mm) Recommended for use with any suggested base.
- Page 11 Hardware BH11 Remove from bag of screws and save for the last step 65900A #10Bx1/2" (13 mm) 65004 65923 65103 Black Screw (8) #8Ax5/16" (8 mm) #8-32x3/8" (10 mm) #8-32 Hex Nut (50) (Packed with Screws) Screw (192) Bolt (50) 66646 67293 66045...
-
Page 12: Parts List
Parts List BH12 Assembly Part Part Quantity Check Key No. Number Description in Carton List 9403 Front Floor Frame 9914 Rear Floor Frame 9907 Rear Wall Angle 9396 Door Track 5997 Left Gable 5996 Right Gable 9402 Side Floor Frame 5288 Corner Post 9912... - Page 13 Assembly by Key No. BH13...
- Page 14 Step 1 Parts Needed For 9396 Door Track (1) Door Track Assembly The door track assembly supports the sliding doors and reinforces the front wall. Hint: The holes in the top side of the door track are for fastening the gable to the top of the front wall in a later step.
- Page 15 Step 2 Parts Needed For 9403 Front Floor Frame (1) 9914 Rear Floor Frame (1) Floor Frame 9402 Side Floor Frame (2) BH15 RIGHT REAR 9402 Assemble the four corners of the 9914 oor frame using two screws at each 9402 corner as shown.
- Page 16 5288 Corner Post (4) Step 3 Parts Needed For Door Track Assembly (1) Posts/Top Frames 9907 Rear Wall Angle (1) BH16 9912 Side Wall Angle (2) NOTE The remainder of the building assembly requires many hours and more than one person.
- Page 17 Step 4 Parts Needed For 7311 Door Jamb (2) Door Jambs/Studs 9344 Siding Stud (4) BH17 The door jambs reinforce the door opening and provide an attractive trim. The studs provide a surface for attaching the siding panels. NOTCHED EDGE Fasten the top of the door jambs MUST FACE CENTER OF BUILDING...
- Page 18 Step 5 Parts Needed For 9911 Side Siding (6) Side Siding BH18 Each screw in the wall requires a washer. CORRECT INCORRECT STEP Slide side siding into channels of corner posts, flat edge upward, STEP bottom edge down resting on oor frame.
- Page 19 Step 6 Parts Needed For 9910 Rear Siding (3) Rear/Front Siding 9913 Front Siding (6) BH19 STEP STEP Slide rear siding into channels of corner posts fastening to rear Fasten Top Center of frame as shown in previous Step. Last Siding to Stud 9910 Install rear siding to complete rear wall.
- Page 20 Step 7 Parts Needed For 5996 Right Gable (2) 5997 Left Gable (2) Gables/Braces 6658 Gable Brace (2) BH20 The gables go on top of the front and rear walls to support the roof beams. NOTE The gables are packed nested STEP together and might be mistaken as one piece.
- Page 21 Step 8 Parts Needed For 5964 Roof Beam (1) Roof Beam/Angle 5982 Roof Angle (1) BH21 Fasten the roof beam, small holes STEP on top, to the gable brace of the front gable. Roof Angle Fasten the other end of the roof beam to the gable brace of the rear gable.
- Page 22 Step 9 Parts Needed For 6442 Right Roof Panel (1) Right Roof Panel BH22 Installing the roof panels is best done with a step ladder. Begin installing roof panels at the back right corner of the building. Each screw and bolt in the roof requires a washer.
- Page 23 Step 10 Parts Needed For 6443 Left Roof Panel (1) Left Roof Panel BH23 Install a left roof panel at the left rear corner of the roof. STEP 6443...
- Page 24 Step 11 Parts Needed For 6443 Left Roof Panel (1) 6442 Right Roof Panel (1) Front of Roof BH24 Cover the joint at the peak with weather stripping tape. Unroll the tape and press it down over the opening at the ridge as you install each roof panel.
- Page 25 Step 12 Parts Needed For 6869 Ridge Cap (1) Ridge Cap/Roof Trim 6015 Side Roof Trim (2) BH25 STEP Install the ridge cap on the com- 6869 pleted roof section using bolts and nuts. STEP Fasten the roof panel rib, peak cap and ridge cap together using Peak Cap bolts and nuts.
-
Page 26: Door Assembly
Step 13 Parts Needed For 6657 Door Handle Brace (2) 10482 Right and Left Doors (2) Door Assembly 10499 Horizontal Door Brace (4) BH26 The steps on this page tell how to assemble the right door. You will per- form exactly the same procedures for the left door. - Page 27 Step 14 Parts Needed For Right Door Assembly (1) Door Installation & Adjustment Left Door Assembly (1) Horizontal Door Brace Gable Door Track Door Slide From inside the building, put the bottom of the right door assembly (on your left when you are inside the building) behind door jamb into the STEP STEP...
- Page 28 ED65 ED65BS ED65LG ED65SB ED65Z WR65 WR65EU GD65 CL28 Anchoring and Floor Frame Anchoring Anchor your building at this time. Floor Frame If you have purchased a Floor Frame Kit you need to install it at this time. SOME FACTS ABOUT RUST 1.