Carrier 16LJ-F Series Operation Manual page 6

Absorption chiller
Hide thumbs Also See for 16LJ-F Series:
Table of Contents

Advertisement

TURN OFF THE BREAKER BEFORE
CLEANING AND CHECKING
Always turn off the breaker before
cleaning and checking the cooling
tower fan, water pumps, or others
linking to the chiller, to provide
protection from electric shock or
possible injury by the rotating part.
KEEP FLAMMABLES AWAY FROM THE
CHILLER
Do not place any flammables
(gasoline, thinner, etc.) close to the
chiller, flue, chimney and oil tank to
prevent a fire.
USE THE CORRECT POWER SUPPLY
The rating indicated on the name
plate of the chiller. Use of the power
other than specified here may cause
a fire or electric shock.
NEVER CHANGE THE SET VALUE
Never change the set value of the
safety and/or protective devices.
Wrong setting may damage the chiller
or cause a fire.
ONLY AUTHORIZED PERSONNEL SHOULD
DISPOSE OF THE CHILLER
To dispose of the chiller, contact the
local specialist. Any defective disposal
may cause metal corrosion or skin
disease by absorbent leak.
DO NOT CUT THE POWER SUPLLY WHILE
THE CHILLER IS STOPPING
Chiller is watching the vacuum level
while it is stopping.
WARNING
DO NOT TOUCH THE PARTS INSIDE THE
CONTROL PANEL
DO NOT TOUCH THE CONTROL PANEL
SWITCH WITH WET HANDS
Do not touch the parts inside the
control panel to avoid electric shock.
Must be
Do not touch the switch inside the
observed
control panel with wet hand to avoid
electric shock.
DO NOT TOUCH ANY ROTATING PART
Keep away your fingers and/or
clothes from any rotating part of fan
or pump to avoid possible injury.
Prohibited
CALL SPECIALISTS FOR SERVICE OR
MAINTENANCE
Call specialists for service or
maintenance. Wrong service
Prohibited
/maintenance may cause electric
shock, a fire or burn.
ONLY AUTHORIZED PERSONNEL SHOULD
REMOVE OR REPAIR THE CHILLER
Any relocation or moving of the
chiller should be done by authorized
Prohibited
personnel only. Incomplete work
could result in a vacuum break, a
solution leak, electric shock or a fire.
ONLY AUTHORIZED PERSONNEL SHOULD
PERFORM THE WIRING
Only those who are authorized
should perform the wiring.
Incomplete work could result in a fire.
Must be
observed
USE PARTS THAT ARE SPECIFIED
Use parts that are specified, or it may
cause a malfunction.
Prohibited
1-2
Do not
touch
Prohibited
Must be
observed
Must be
observed
Must be
observed
Prohibited

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents