Carrier 16LJ-F Series Operation Manual page 23

4-3-3. Stop operation
(1) Local operation mode
a) Press the "STOP" button
then the local start/stop stand by lamp
b) After the machine stop the operation, the lamp on
the RUN button
stand by lamp will be off.
c) The lamp on the STOP button
(2) Remote operation mode
a) Turn on the stop switch on the remote control panel of field supply.
b) Another way to stop the Chiller is to press "STOP" button on the control panel
during the remote operation.
NOTE : The chilled water pump and the cooling water pump
should be operated by on-off signal from the chiller.
If the chiller starts, these equipments also will start automatically.
Air handling unit must be stopped after the chilled water pump is stopped.
a) Confirm the "LOCAL" indication lamp
(5)
on the control panel,
(2)
will be off and the local start/stop
(4)
will be on.
4-5
(3)
will be on.
(1)
is on.
(2)
(5)
(3)