Carrier 16LJ-F Series Operation Manual page 29

4-7-2. Actions to be taken
THE CHILLER
An alarm occurs.
Alarm buzzer sounds, and the
indication lamp of "STOP" key blinks.
Alarm code is shown on the data display.
The alarm buzzer stops.
The indication lamp of "STOP" key stops
blinking and lights up. The alarm code on
the data display disappears.
Operation restarts.
Press the "BUZZER STOP" key on the
touch panel.
Check the content of the alarm and
solve the problem.
Press "STOP" key on the operation board
after the troubleshooting is completed.
NOTE :
Start operation reffering to
Section 4-3
4-11
ACTION
Data display shows alarm
again If the "STOP" key is
pressed before eliminating the
cause of the alarm.
Make sure this is done.