Carrier 16LJ-F Series Operation Manual page 26

4-5. HOW TO CHANGE THE SETTING POINT
1. Check the current setting point at "Analog data" .
2. Touch the setting value
3. The setting window will be displayed
4. Set the new set point.
5. Touch
6. After touch the "Set" key , the new set point will be displayed.
( It takes max. 10 seconds untill display the new set point)
When there is no key operation for 1 minute or "Main menu" key is touched, the display returns to
the main menu.
NOTE 1: Wrong setting may cause a failure of the Chiller.
If you need to change setting, be sure to contuct service agent
NOTE 2: The changed setting become instantly effective upon changing it.
Be careful in changing the set values during operation.
key
4-8