Table of Contents
Advertisement
8. If not replacing the processor, install the original plastic socket cover over the processor socket.
•
Squeeze the finger grips at each end of the cover (see Letter A).
•
Carefully lower the cover over the four alignment pins of the bolster plate and onto the
processor socket (see Letter B).
•
Release finger grips to lock the cover in place.
•
Ensure the socket cover is locked in place.
Caution: Do not press down on the center of the socket cover.
7.4.1.2
PHM Disassembly
1. While holding down the PHM, rotate the lever (see Letter A) from left to right until the processor lifts free
from the processor carrier clip.
2. Holding down the processor carrier clip, carefully lift the processor and slide it out of the processor
carrier clip (see Letter B).
Intel® Server D50TNP Family Integration and Service Guide
Figure 144. Reinstall the Socket Cover
Figure 145. Processor Removal from PHM Assembly
113
Advertisement
Table of Contents
