Yamaha AN1x Owner's Manual page 94

D e v i ce N o
(Device N umber)
The Device N umber parameter lets yo u set the MIDI
device number when perfo rming bulk dump o peratio ns,
o r when transmitting and receiving System Exclusive
messag es. Bo th devices sho uld be set to the same
channel number.
Settings: 1 ~ 1 6 , all, o ff
Lo ca l
The L o cal parameter lets yo u desig nate the AN 1 x's
keybo ard to play the internal to ne g enerato r o r no t.
W hen set to " o n" , playing the AN 1 x's keybo ard will
cause the internal to ne g enerato r to so und. W hen set
to " o ff" , playing the keybo ard will no t play the internal
to ne g enerato r, but will o utput no te data via MIDI
[O UT] to play an external to ne g enerato r o r reco rd into
an external sequencer.
N o rmally this will be set to " o n" unless yo u are using
the AN 1 x as a master keybo ard co ntro ller fo r
reco rding no te data into an external MIDI sequencer,
and having the o utput o f the sequencer determine
whether the AN 1 x's to ne g enerato r plays o r no t, by
sig nals received at MIDI [IN ].
External MIDI Device
MIDI OUT
MIDI IN (Rx Ch)
Local on/off
switch
AN1x
Tone
Generator
ARP/SEQ
Settings:
o n, o ff
The Bulk Dump parameter lets yo u initiate bulk dump
o peratio ns when o fflo ading AN 1 x data to an external
MIDI data sto rag e device (such as the Yamaha MDF2
MIDI Data Filer) o r ano ther AN 1 x. Bulk dump
o peratio ns let yo u back up yo ur impo rtant vo ice, Free
EG , pattern and system data fo r safekeeping , and then
lo ad them back into the AN 1 x whenever yo u wish.
Send Bulk Dum p
1 .
Ava ila ble types:
1 scene:
1 vce:
1 -6 4 vce:
6 5 -1 2 8 vce:
a ll voices:
1 ptn:
Sequencer.
1 -6 4 ptn:
6 5 -1 2 8 ptn:
a ll ptn:
system :
a ll:
MIDI IN
MIDI OUT (Tx Ch)
Keyboard
Controller
94
Bulk D um p
Before initiating a bulk dump operation, you must set up the external device for
bulk dump send and/ or receive. You' ll also need to match the Device Number of
the AN1 x and the external device. For information, see the owner's manual which
came with the external device.
Press Bulk Dump [UP/ DOW N ] to select the type
of da ta to be sent.
Sends the data o f the currently selected Scene.
Sends the data o f the currently selected Vo ice.
Sends data fo r vo ice set 1 ~ 6 4 .
Sends data fo r vo ice set 6 5 ~ 1 2 8 .
Sends data fo r all 1 2 8 vo ices.
Sends data fo r the pattern currently selected in the Step
Sends data fo r the User Pattern bank 1 -6 4 .
Sends data fo r the User Pattern bank 6 5 -1 2 8 .
Sends all Step Sequencer User Pattern data.
Sends all system parameter data.
Sends all data in memo ry.