Change Your Password; Save Your Configuration - ZyXEL Communications XS3800-28 User Manual

28-port 10gbe l3 managed switch

Hide thumbs Also See for XS3800-28:

Table of Contents

Table 20 Navigation Panel Links (Networked AV Mode) (continued)

Configuration

Configuration

Configuration

Tech-Support

4.5.1 Change Your Password

After you log in for the first time, it is recommended you change the default administrator password.

Click Management > Access Control > Logins to display the next screen.

Figure 44 Change Administrator Login Password

When you are done modifying the settings in a screen, click Apply to save your changes back to the

run-time memory. Settings in the run-time memory are lost when the Switch's power is turned off.

Click the Save link in the upper right of the Web Configurator to save your configuration to non-volatile

memory. Non-volatile memory refers to the Switch's storage that remains even if the Switch's power is

Chapter 4 Web Configurator

This link takes you to a screen where you can save your Switch's configurations (settings) for

This link takes you to a screen to upload firmware to your Switch.

This link takes you to a screen to reboot the Switch without turning the power off.

This link takes you to a screen where you can upload a stored device configuration file.

This link takes you to a screen where you can save the current configuration (settings) to a

specific configuration file on the Switch.

This link takes you to a screen where you can download related log reports for issue analysis.

Log reports include CPU history and utilization, crash and memory.

This link takes you to screens where you can copy traffic from one port or ports to another port

in order that you can examine the traffic from the first port without interference.

XS3800-28 User's Guide