Web Configurator Layout - ZyXEL Communications XS3800-28 User Manual

Table 16 Wizard > Advanced Settings > Step 4 Summary (continued)
LABEL
IP Interface
VID
IP Address
IP Subnet Mask
Default Gateway
DNS Server
Change administrator's password and activate SNMP
New Password
SNMP
Version
Get Community
Set Community
Trap Community
Networked AV – Advanced Settings
Networked AV VLAN
Networked AV VLAN
IP
IGMP Snooping
IGMP Snooping
Querier
Unknown Multicast
Frame
Transmitter/Receiver
Connected Port
Inter-switch
Connected Port (Link
Aggregation)
Previous
Finish
Cancel

4.5 Web Configurator Layout

The Status screen is the first screen that displays when you access the Web Configurator.
The following figure shows the navigating components of a Web Configurator screen.
Chapter 4 Web Configurator
DESCRIPTION
This field displays whether the WAN interface is using a DHCP IP address or a static IP
address.
This field displays the VLAN ID.
This field displays the Switches' IP address for it to be managed over the network.
This field displays the subnet mask that specifies the network number portion of an IP
address.
This field displays the IP address of the default outgoing gateway in dotted decimal
notation, for example 192.168.1.254.
This field displays the DNS (Domain Name System) for mapping a domain name to its
corresponding IP address and vice versa.
This field displays asterisks when a new password has been created.
This field displays whether the Switch acts as an SNMP agent.
This field displays the SNMP version for the Switch.
This field displays the Get Community string.
This field displays the Set Community string.
This field displays the Trap Community string.
This field displays the VLAN ID for the AVoIP network.
This field displays the corresponding VLAN ID's IP address for the AVoIP network.
This field displays Active when IGMP Snooping is enabled to forward group multicast traffic
only to ports that are members of that group.
Otherwise, it displays Inactive.
This field displays Active when the Switch is allowed to send IGMP General Query messages
to the VLANs with the multicast hosts attached.
Otherwise, it displays Inactive.
This field displays the action to perform when the Switch receives an unknown multicast
frame. It displays Drop when the frames are discarded. It displays Flooding when the frames
are sent to all ports.
This field shows the Switches' port numbers for connection to networked audio and video
equipment.
This field shows the Switches' port numbers for connection to another switch.
Click Previous to show the previous screen.
Review the information and click Finish to create the task.
Click Cancel to exit this screen without saving.
XS3800-28 User's Guide
70