Aaa; Chapter 26 Aaa; Authentication, Authorization And Accounting (Aaa); What You Can Do - ZyXEL Communications XS3800-28 User Manual

26.1 Authentication, Authorization and Accounting (AAA)

This chapter describes how to configure authentication, authorization and accounting settings on the
Switch.
The external servers that perform authentication, authorization and accounting functions are known as
AAA servers. The Switch supports RADIUS (Remote Authentication Dial-In User Service) and TACACS+
(Terminal Access Controller Access-Control System Plus) as the external authentication, authorization,
and accounting server.
Figure 236 AAA Server

26.1.1 What You Can Do

• Use the AAA screen
enable authentication and authorization or both of them on the Switch.
• use the RADIUS Server Setup screen
settings.
• Use the TACACS+ Server Setup screen
authentication settings.
• Use the AAA Setup screen
accounting settings, such as the methods used to authenticate users accessing the Switch and which
database the Switch should use first.

26.1.2 What You Need to Know

Authentication is the process of determining who a user is and validating access to the Switch. The
Switch can authenticate users who try to log in based on user accounts configured on the Switch itself.
The Switch can also use an external authentication server to authenticate a large number of users.
Authorization is the process of determining what a user is allowed to do. Different user accounts may
have higher or lower privilege levels associated with them. For example, user A may have the right to
create new login accounts on the Switch but user B cannot. The Switch can authorize users based on
user accounts configured on the Switch itself or it can use an external server to authorize a large number
of users.
Accounting is the process of recording what a user is doing. The Switch can use an external server to
(Section 26.2 on page 309) to display the links to the screens where you can
(Section 26.3 on page
(Section 26.4 on page
(Section 26.5 on page
XS3800-28 User's Guide
308
C
H A P T E R
310) to configure your RADIUS server
311) to configure your TACACS+
313) to configure authentication, authorization and
26

AAA