License Option; Multi-Gigabit - ZyXEL Communications XS3800-28 User Manual

28-port 10gbe l3 managed switch
Hide thumbs Also See for XS3800-28:
Table of Contents

Advertisement

Figure 1 Switch Application

1.1.1 License Option

At the time of writing, the following Switch license is available for purchase. The following table shows
the features supported for the new license.
Table 1 License Comparison
LICENSE NAME
Basic Routing License

1.1.2 Multi-Gigabit

A 10 Gigabit port supports speeds of 10 Gbps if the connected device supports 10 Gbps and a Cat 6a
(up to 100 m) or Cat 6 cable (up to 50 m) is used. The speed drops to 1G if these criteria are not met; it
drops to 100 Mbps if a Cat 5 cable is used (up to 100 m).
If a network device such as a 5G network card, gaming computer, server, Network Attached Storage
(NAS) or Access Point (AP) only supports 2.5 Gigabit or 5 Gigabit connectivity, then the maximum speed
potential of these devices is never reached.
In addition, at the time of writing, most existing cabling is Cat 5e or Cat 6, further limiting maximum
Chapter 1 Getting to Know Your Switch
UNLOCKED SERVICES
RIPv1, v2
OSPF v2
DVMRP
IGMP
L3 Loopback Interface
XS3800-28 User's Guide
29
STACKING MODE SUPPORT
No

Advertisement

Table of Contents
loading

Table of Contents