Delivery And Storage; Inspection; Moving The Unit; Lifting By Crane / Hoist - York YCRS Series Installation, Operation And Maintenance Manual

Water cooled remote condenser 81 tons through 194 tons (285 kw through 682 kw)
Table of Contents

Advertisement

TRANSPORTATION, HANDLING AND STORAGE

DELIVERY AND STORAGE

To ensure consistent quality and maximum reliability,
all units are tested and inspected before leaving the fac-
tory. Units are shipped completely assembled and con-
taining refrigerant under pressure. Units are shipped
without export crating unless this has been specified
on the Sales Order.
If the unit is to be put into storage, before installation,
the following precautions should be observed:
Ensure that all openings, such as water connections,
are securely capped.
Do not store where exposed to ambient air tempera-
tures exceeding 107°F (42°C).
The unit should be stored in a location where there is
minimal activity to limit the risk of accidental physical
damage.
To prevent inadvertent operation of the pressure relief
devices the unit must not be steam cleaned.
It is recommended that the unit is periodically inspected
during storage.
FIG. 4 – LIFTING INFORMATION
YORK INTERNATIONAL
SECTION 3

INSPECTION

Remove any transit packing and inspect the unit to en-
sure that all components have been delivered and that
no damage has occurred during transit. If any damage
is evident, it should be noted on the shipment docu-
mentation and a claim entered according to the instruc-
tions given.
Major damage must be reported immediately to your
local YORK representative.

MOVING THE UNIT

Before moving the unit, ensure that the installation site
is suitable for installing the unit and is capable of sup-
porting the weight of the unit and all associated services.
The units are designed to be lifted using either lifting
chains or a fork lift.

Lifting by Crane / Hoist

A spreader frame should be used to prevent damage to
the unit from the lifting chains.
LD07801
FORM 201.25-NM1 (302)
The unit must only be lifted at the
points provided.
RIGGING INSTRUCTIONS
AND ESTIMATED SHIPPING
WEIGHT LBS.
MODEL
WEIGHT
YCRS0100SC
5,989
YCRS0120SC
6,271
YCRS0140SC
6,584
YCRS0180SC
9,026
YCRS0200SC
9,132
YCRS0220SC
9,162
YCRS0240SC
9,252
3
17

Advertisement

Table of Contents
loading

Table of Contents