Table of Contents
Advertisement
Refer to Figures 3 & 4 for Flue
Collar Centerline Dimensions
(318mm)
(419mm)
Figure 1 - Oxford dimensions.
The Oxford stove is shipped from the factory as a Direct Vent Gas Heater. This heater may be converted into a
Natural Vent unit in the field. If a Natural Vent heater is desired, the FSDHAGSLP Draft Hood must be directly
installed to the top of the unit according to the installation instructions.
When the stove is converted to Natural Vent, it uses 4" vent pipe. For aesthetic purposes the Hearth & Home
Technologies direct vent system may be used up to the ceiling.
3-90-693831
Hearth and Home Technolgies • Oxford Direct Vent Installation Manual_R6 • 08/17
Oxford Direct Vent / Natural Vent Dimensions
(721mm)
C L Valve
4³⁄₈"
Inlet
(111mm)
12¹⁄₂"
17"
24¹⁄₂"
(622mm)
28³⁄₈"
23"
(584mm)
5123
Attention
Oxford dims
6³⁄₄"
(172mm)
C L
Valve Inlet
5
Advertisement
Table of Contents
