Front Panel Indicators And Controls - Extron electronics RGB-DVI 300 User Manual

Front Panel Indicators and Controls

Figure 8.
The front panels of the RGB-DVI 300, RGB-HDMI 300, and RGB-HDMI 300 A have a green/
amber LED indicator, a config port, menu and enter buttons, and two rotary encoders.
a
b
c
d
CONFIG
1 2
CONFIG
RGB-DVI 300 and RGB-HDMI 300 A
LED indicator — A solid green light indicates the unit is receiving power and has an
active video input. A solid amber light indicates the unit is receiving power but no video
input.
Config port — This connects to a host device. See
Menu and Enter buttons — These buttons are used to navigate the menu when
configuring the input and output video signals (see
enable and disable the Front Panel Security Lockout (also called Executive mode). For
"Front Panel Security
more information, see
NOTE: To see menu selections, a display device must be attached to the output of
the video converter.
Rotary encoders — The horizontal and vertical rotary encoders highlight menu items
and adjust the value of items that have been selected from the menu.
RGB-DVI 300 and RGB-HDMI 300 (A) • Configuration
ADJUST
MENU ENTER
RGB - HDMI 300 A
3 4
ADJUST
MENU ENTER
"Front panel Cabling"
"On-Screen Menus") and to
Lockout".
RGB - DVI 300
on page 5.
11