Table of Contents
Advertisement
Agent Mode:
5.6.3.2 Trap Configuration
A trap manager is a management station that receives the trap messages generated by the switch. If no trap manager is
defined, no traps will be issued. To define a management station as a trap manager, assign an IP address, enter the
SNMP community strings, and select the SNMP trap version.
The page includes the following fields:
Object
IP Address:
Community:
Trap Version:
Remove
before and click
The strings of Public_RO and Private_RW are default strings. You can remove
them but after resetting the switch to default, the two strings show up again.
Select the SNMP version that you want to use it. And then click
switch to the selected SNMP version mode.
Figure 5-45 Trap Managers interface
Description
Enter the IP address of the trap manager.
Enter the community string for the trap station.
Select the SNMP trap version type—v1 or v2c.
88
User's Manual of ISW-1022M
.
Change
to
Advertisement
Table of Contents
