Table of Contents
Advertisement
5.6.6.5 X-Ring Configuration
The Managed Industrial Switch supports the function and interface for setting the switch as the ring master or not. The ring
master can negotiate and place command to other switches in the X-Ring group. If there are 2 or more switches in master
mode, the software will select the switch with lowest MAC address number as the ring master. The X-Ring master ring
mode can be enabled by setting the X-Ring configuration interface. Also, the user can identify whether the switch is the
ring master by checking the R.M. LED indicator on the panel of the Switch.
The system also supports the Couple Ring that can connect 2 or more X-Ring group for the redundant backup function;
Dual Homing function that can prevent connection lose between X-Ring group and upper level/core switch. Apart from
the advantages, Dual Ring can handle 2 rings in the system and has the ability to recover from failure within 20
milliseconds.
The page includes the following fields:
Object
Enable Ring:
Figure 5-63 X-Ring Interface
Description
To enable the X-Ring function, tick the checkbox beside the Enable Ring string
label. If this checkbox is not ticked, all the ring functions are unavailable.
Enable Ring Master: Tick the checkbox to enable this switch to be the
ring master.
st
nd
1
& 2
Ring Ports: Pull down the selection menu to assign the ports as
the member ports. 1
105
User's Manual of ISW-1022M
st
Ring Port is the working port and 2
nd
Ring Port is
Advertisement
Table of Contents
