4.3.9 Alert Trap Configuration
This function displays the Industrial PoE Switch alert trap configuration; include "Enable" or "Disable" the trap mode and
set the alert IP address. As shown in
Object
Trap mode
Alert IP address
Trap event
Figure 4-20
and description on
Figure 4-20 Alert Trap Configuration screen
Can choose enable/disable to get the trap
Assign one IP address of host to receive SNMP trap from the device.
Choose the events to send the SNMP trap. The trap events include:
Cold Start
Login Fail
Password changed
IP Changed
Link up
Link down
PoE Alert
Table 4-7 Descriptions of the Alert Trap Configuration
Table 4-7.
Description
-42 -
User's Manual