Sntp Commands Set - Planet ISW-1022M User Manual

no event smpt
show systemlog

6.14 SNTP Commands Set

Netstar Commands
sntp enable
sntp daylight
sntp daylight-period
[Start time] [End time]
sntp daylight-offset
[Minute]
sntp ip
[IP]
sntp timezone
[Timezone]
show sntp
show sntp timezone
no sntp
no sntp daylight
log
I Disable port event for SMTP
P Show system log client &
server information
Level Description
G Enable SNTP function
G Enable daylight saving time, if
SNTP function is inactive, this
command can't be applied.
G Set period of daylight saving
time, if SNTP function is
inactive, this command can't
be applied.
Parameter format:
[yyyymmdd-hh:mm]
G Set offset of daylight saving
time, if SNTP function is
inactive, this command can't
be applied.
G Set SNTP server IP, if SNTP
function is inactive, this
command can't be applied.
G Set timezone index, use "show
sntp timzezone" command to
get more information of index
number
P Show SNTP information
P Show index number of time
zone list
Disable SNTP function
G
G Disable daylight saving time
134
User's Manual of ISW-1022M
switch(config-if)#no event systemlog
switch(config)#interface fastethernet 3
switch(config-if)#no event smtp
switch#show systemlog
Example
switch(config)#sntp enable
switch(config)#sntp daylight
switch(config)# sntp daylight-period
20060101-01:01 20060202-01:01
switch(config)#sntp daylight-offset 3
switch(config)#sntp ip 192.169.1.1
switch(config)#sntp timezone 22
switch#show sntp
switch#show sntp timezone
switch(config)#no sntp
switch(config)#no sntp daylight