Wall Mount Plate Mounting - Planet ISW-1022M User Manual

8-port 10/100mbps + 2 gigabit tp/sfp managed industrial switch
Hide thumbs Also See for ISW-1022M:
Table of Contents

Advertisement

3.
Check if the DIN-Rail is tightened on the track or not.
4.
To remove the industrial switch from the track, reverse above steps.

2.2.3 Wall Mount Plate Mounting

Follow the steps below to mount the Industrial Switch with wall mount plate.
1.
Remove the DIN-Rail from the Industrial Switch; loose the screws to remove the DIN-Rail.
2.
Place the wall mount plate on the rear panel of the Industrial Switch.
3.
Use the screws to screw the wall mount plate on the Industrial Switch.
4.
Use the hook holes at the corners of the wall mount plate to hang the Industrial Switch on the wall.
5.
To remove the wall mount plate, reverse the above steps.
Figure 2-6 DIN-Rail mounting
Figure 2-7 Wall mounting
18
User's Manual of ISW-1022M

Advertisement

Table of Contents
loading

Table of Contents