Vitek VT-1331 Manual Instruction page 6

•
•
•
•
•
•
•
Notes:
•
•
•
•
•
•
•
T-1331.indd 6
ENGLISH
Attention! The outer surface of the body heats up
strongly, so touch the unit in the area of the handle
(6) only.
Avoid contact of heated surfaces with your face, neck
and other open parts of your body.
Do not comb your hair right after styling, let it cool off.
Divide the locks with your fingers carefully to make them
look natural.
To do this, open the heating plates (1), press them
together and set the lock (7) to the position
Insert the power plug into the mains socket.
Switch the unit on by pressing the ON/OFF button (5),
the preset heating temperature of the plates will appear
on the display (2).
Set the temperature of the heating plates (1), using the
buttons (3, 4) «+/-», the indication of the selected tem-
perature will be flashing on the display (2).
Flashing temperature indications on the display (2)
mean that the plates (1) are heating up; temperature
indications glowing constantly mean that the plates (1)
have reached the set temperature and you can start
straightening your hair.
Setting the temperature, remember that the plates (1)
get hot fast while their cooling takes much more time.
After setting the required temperature, you can lock
the selected mode by pressing the ON/OFF button (5)
twice, the symbol « » will appear on the display. You
can switch the lock mode off by pressing the ON/OFF
button (5) twice.
Hair type
Damaged, colored or
bleached hair
Normal hair
For professional styling
Hang the unit on the loop (8).
Divide the hair into locks not wider than 4-5 cm each.
Wait until the plates (1) heat up to the set temperature.
Place the hair lock between the plates (1) and press
them together. During operation hold the unit by the
Temperature
from +140°С to +160°С
+180°С
from +200°С to +220°С
6
.
10/13/20 1:04