Safety Measures - Vitek VT-1331 Manual Instruction

HAIR STRAIGHTENER VT-1331
The unit is intended for hair straightening.
DESCRIPTION
1. Heating plates
2. Display
3. Temperature increase button «+»
4. Temperature decrease button «-»
5. ON/OFF button
6. Handle
7. Heating plates lock
8. Hanging loop
ATTENTION!
Do not use this unit near containers filled with water (such
as a sink, bath etc.).
•
•
•

SAFETY MEASURES

Before using the unit, read this instruction manual carefully.
Keep this manual for future reference.
Use the unit for intended purposes only, as specified in
this manual. Mishandling the unit can lead to its breakage
and cause harm to the user or damage to his/her property.
•
•
•
•
T-1331.indd 3
When using the unit in a bathroom, unplug it right after
usage by taking the power plug out of the mains socket,
as closeness of water is dangerous even if the unit is
switched off.
For additional protection you can install a residual cur-
rent device (RCD) with nominal operation current not
exceeding 30 mA into the bathroom mains; contact a
specialist for installation.
Do not put the operating unit on any surface, but
hang it on the loop (8) instead. Make sure that the
heating plates and outer operating surfaces do not
touch fusible and inflammable objects (plastic,
polyethylene, synthetic materials etc.).
Before switching the unit on, make sure that the voltage
of the mains corresponds to the unit operating voltage.
Never leave the operating unit unattended.
Do not switch the unit on in places where aerosols are
sprayed or highly inflammable liquids are used.
Hair spray should be applied only after hair straighten-
ing is finished.
ENGLISH
3
10/13/20 1:04