Position In The Rack - Panasonic WJ-NX400K/GJ Installation Manual

2 Rack mounting

Position in the Rack

This is an example where the recorder and the extension unit (WJ-HXE400, max 5 units) are installed in the rack.
Connect the recorder and the extension unit using the connection cable (1.5 m {4 feet 11 inches}) provided with the extension unit.
(☞ Page 19)
NX400
Extension unit
(Unit number 1)
Extension unit
(Unit number 2)
Extension unit
(Unit number 3)
Extension unit
(Unit number 4)
Extension unit
(Unit number 5)
Note:
• When installing the recorder in the rack, leave a space of 1U (44 mm {1-23/32 inches}) above and below the recorder for ventila-
tion.
• The unit number of the connected extension unit is the same as the external storage connector number of the recorder.
14
(continued)
Other unit, Rack upper side
Other unit, Rack bottom side
Require a space of 1 unit
Connection cable
(provided with extension unit)
Require a space of 1 unit
Require a space of 1 unit
Require a space of 1 unit
Require a space of 1 unit
Require a space of 1 unit
Require a space of 1 unit