Move A Camera To The Preset Position - Panasonic WJ-ND300 Operating Instructions Manual

Move a Camera to the Preset Position

Moves a camera to the preset position registered in advance. Registering preset positions is required to perform the
preset function.
Refer to the operating instructions of the connected camera for the descriptions of how to register the preset posi-
tion. It is impossible to register the preset positions of cameras using this unit.
Screenshot 1
Display the [CAM] tab.
Auto Function (Auto Pan, etc)
Moves a camera with an auto function set in advance.
Screenshot 1
Display the [CAM] tab.
Step 1
Click the [i] button in the [Preset] box to select a pre-
set number (HOME, 1 - 16) to be moved.
Step 2
Click the [Set] button.
→ The camera moves to the registered preset position
respective to the selected preset number.
Step 1
The auto function can be performed by clicking the [ON]
button in the [Auto] box.
Click the [OFF] button to stop the auto function.
Note:
Refer to the operating instructions of the connected
camera for further information about the auto func-
tion of the camera.
25