Panasonic WJ-NX400K/GJ Installation Manual page 11

Operations flow
Installation of HDD unit
7
☞ Page 32
Configure the minimum settings
8
[Easy Start]
☞ Page 35
☞ Operating Instructions
Start operations
(continued)
Setup
(PDF file on the Panasonic
support website)
Example of an operational screen
Remove the "HDD unit holding bracket" of the recorder and
take out the HDD unit.
The removed "HDD unit holding bracket" is necessary when
transporting the recorder. Keep it in an appropriate place.
Register the date & time and cameras on "Easy Start".
When it is not necessary to change other default settings, it
is possible to start operations.
If necessary, perform the detailed settings for each function.
When the camera image is displayed on the main monitor or
the web browser on the PC and can be recorded or played,
the recorder is ready for operation.
11