Panasonic WJ-NX400K/GJ Installation Manual page 25

3 Connections
Alarm connection example
When a signal output from the other device is supplied to the Alarm input 1 to 32 terminals (pin nos. A1~A16, B1~B16), record-
ing or an alarm action will be performed in accordance with the settings. When an alarm device such as a buzzer, a lamp, etc., is
installed outside, connect them to the Alarm output terminal (pin no. C2).
Alarming device
* Attached when necessary
Sensor
(continued)
Relays, etc.*
D1
D11
(Signal ground)
D12
ALARM/CONTROL connector
B1
Door security
switch
B16
ALARM IN connector
C1
C2 (Alarm output 2)
C12
A1
A16
25