3. When READY indicator starts to blink, release the FEED/CONFIG.
button. Printer now will print out a configuration report.
4. Printer will enter Dump mode after printing configuration, if it's
with Argox PPLB emulation. To return to normal operation mode
from Dump mode, press the CANCEL/RESET button. Another way is
to turn off printer power, and then restart printer.
When the READY indicator stops blinking and remain illuminated,
printer is back in normal operation mode.
Note: In Dump mode, all characters will be printed in 2 columns:
the right shows characters received from your system, and the
left shows corresponding hexadecimal values of the characters.
It allows users or engineers to verify and debug the program.
34
MP Series - User's Manual